電加熱器的任務原理：

電加熱器是一種耗費電能轉換為熱能，來對需加熱物料停止加熱。在任務中高溫流體介質經過管道在壓力作用下進入其輸出口，沿著電加熱容器外部特定換熱流道，運用流體熱力學原理設計的途徑，帶走電熱元件任務中所發生的低溫熱能量，使被加熱介質溫度降低，電加熱器出口失掉工藝要求的低溫介質。

下面萬森電器設備為大家介紹下電加熱器的8個功用特點：

1、體積小、功率大：加熱器次要采用集束式管狀電熱元件。

2、熱呼應快、控溫精度高，綜合熱效率高。

3、加熱溫度高：加熱器設計zui高任務溫度可達850℃。

4、介質出口溫度平均，控溫精度高。

5、使用范圍廣、順應性強： 該加熱器可適用于防爆或普通場所，防爆等級可達dⅡB級和C級，耐壓可達20MPa。

6、壽命長、牢靠性高：該加熱器采用特殊電熱資料制造，設計外表功率負荷低，并采用多重維護，使電加熱器平安性和壽命大大添加。

7、可全自動化控制： 依據要求經過加熱器電路設計，可方便完成出口溫度、流量、壓力等參數自動控制，并可與機算機聯網。

8、節能效果明顯，電能發生的熱量簡直99.99%傳給加熱介質。

以上就是杭州萬森電器設備有限公司給大家介紹的相關內容，希望對大家有所幫助。
Task principle of electric heater:

Electric heater is a kind of energy consumption converted into heat energy to stop heating materials to be heated. In the task, the high-temperature fluid medium enters its output port under the pressure of the pipeline, along the specific heat exchange channel outside the electric heating vessel, and takes away the low-temperature heat energy occurred in the task of the electric heating element by using the method designed by the principle of fluid thermodynamics, so as to reduce the temperature of the heated medium and lose the low-temperature medium required by the process at the outlet of the electric heater.

The following Wansen electrical equipment introduces 8 functional features of the electric heater:

1. Small volume and large power: the heater mainly adopts bundle type tubular electric heating element.

2、 It has the advantages of fast thermal response, high precision of temperature control and high comprehensive thermal efficiency.

3. High heating temperature: high task temperature of heater design Zui can reach 850 ℃.

4. The medium outlet temperature is average and the temperature control accuracy is high.

5. Wide range of application and strong compliance: the heater can be used in explosion-proof or ordinary places, with explosion-proof grade up to D Ⅱ B and C, and pressure resistance up to 20MPa.

6. Long service life and high reliability: the heater is made of special electric heating materials, designed with low external power load and multiple maintenance, which greatly increases the safety and service life of the electric heater.

7. Fully automatic control: through the heater circuit design according to the requirements, it is convenient to complete the automatic control of outlet temperature, flow, pressure and other parameters, and can be networked with computer.

8. The energy-saving effect is obvious. 99.99% of the heat generated by electric energy is transmitted to the heating medium.

The above is what Hangzhou Wansen Electrical Equipment Co., Ltd. introduced to you, hoping to help you.